Post order notification... please check your email inbox and junk mail for your order confirmation which contains details required to create your Royal Mail return label. When creating your label, please use the full Re-CAL Order Number when asked.

Calibration & Repair Services for all makes of electrical & mechanical test equipment

sales@recal.biz    0161 877 3621
Home » Test Equipment Calibration Shop » Calibration Shop » Industrial / Utility Products » Sonel MZC-306
Log in
Sonel MZC-306

Sonel MZC-306

£3,350.00

Capabilities

  • Test the earth loop on up to 750V electrical systems
  • Fault loop impedance measurement with 0.01? resolution
  • Low-current impedance measurement in circuits protected by RCD ? 30mA with 0.01 ? resolution (100…440 V)
  • Operates in networks with voltages 110/190 V, 115/200 V, 127/220 V, 220/380 V, 230/400 V, 240/415 V, 290/500 V and 400/690 V (operating range 100…750 V)
  • Operating frequency 45…65 Hz
  • Calculation of fault current
  • Automatic differentiation between phase and phase-to-phase voltage
  • Possibility of applying 1.2, 5, 10, 20 m test leads or an adapter terminated by a power network plug
  • Measurement with swapped L and N conductors
  • Measurement of resistance (RS) and reactance (XS) components

Additionally features

  • Contact electrode – quick testing of proper connection of PE conductor.
  • Voltage measurement 0…750 V AC (0…250 V with resolution of 0,1 V).
  • Memory of 990 measurement results, ability to transfer the data to a PC via USB.
  • Power supply: batteries (4 x LR14) or rechargeable batteries.

Applications

This instrument is irreplaceable for all kind of electrical works, especially in situations where there is a need to check the circuits under voltage of 400/690 V. The meter is used for tests in homes, apartment blocks, public buildings, small workshops or factories and even at wind farms.

The meter is a perfect tool for testing systems, where fault currents may reach 5.3 kA (measured according to EN 61557).

For more information visit the Sonel product page

Want a discount? Become a member!
SKU: WMUKMZC306R Category:
Description
The Sonel MZC-306 enables measurements in various types of networks including an approved version (Sonel MZC-306R) which holds full PADS approval with Network Rail for use on their 650V electrification network.  The meter is invaluable for engineers who work on a variety of electrical work in low-voltage areas, such as solar, renewables, homes and buildings, public facilities, workshops and factories.

The resolution of the measurement result is 0.01 ? and the meter can also perform measurements in networks protected by RCD circuit breakers.

The casing of the MZC-306 meter is IP54 rated, which provides a resistance to mechanical damage with the cover of the device also being able to be set at several positions to enable easy and comfortable transport and use of the meter.

The Sonel MZC-306R variant is fully PADS approved by Network Rail.

  • Network Rail approved for use by rail electrification engineers for testing PSCC on 650V signalling power feeders.
  • NR/L3/SIGELP/50001
  • NR/SPS/T007
  • NR/SPS/M001
Voltage0 V…750 V0 V…750 Vfrom 0.1 Vfrom ±(2% m.v. + 2 digits)
Short-circuit loop parameters    
2p method – standard current measurement maximum current 36.7 Afrom 0.13 ?…1999 ? acc. to EN 615570,00 ?…1999 ?from 0.01 ?from ±(4% m.v. + 3 digits)
2p method – measurements without tripping RCDsfrom 0.43 ?…1999 ? acc. to EN 615570,00 ?…1999 ?from 0.01 ?from ±(6% m.v. + 5 digits)
Short-circuit current readings    
2p method – standard current measurementCalculated on the basis of test Zs ranges and rated voltages0.055 A…69.0 kAfrom 0.001 ACalculated on the basis of error for fault loop
2p method – measurements without tripping RCDsCalculated on the basis of test ZS ranges and rated voltages0.055 A…40.0 kAfrom 0.001 ACalculated on the basis of error for fault loop

m.v. – measured value

SKU: WMUKMZC306R

Download: Sonel MZC306 [HERE]

Order now from our brand new energy division!
Di-LOG Energy

Re-CAL is a part of the Di-LOG group, for more information, click the link to view our group divisions.
MENU